A RINGER DEVICE

Figure 1 is a simplified diagram of a bell ringer. Its solenoid is an electromagnet. The core has a hollow region in the center, along its axis, through which a steel rod passes. The coil has many turns of wire, so the electromagnet is powerful if a substantial current passes through the coil. When there is no current flowing in the coil, the rod is held down by the force of gravity. When a pulse of current passes through the coil, the rod is pulled forcibly upward. The magnetic force “wants” the ends of the rod,

Fig. 1. A bell ringer using a solenoid.

which is the same length as the core, to be aligned with the ends of the core. However, the pulse is brief, and the upward momentum is such that the rod passes all the way through the core and strikes the ringer plate. Then the steel rod falls back down again to its resting position, allowing the plate to reverberate. Some office telephones are equipped with ringers that produce this noise rather than conventional ringing, buzzing, beeping, or chirping emitted by most phone sets. The “gong” sound is less irritating to some people than other attention-demanding signals.

مواضيع ذات صلة

The dipole radiator

Radiation

Electromagnetism

ثنائيات الأشعة السينية آلية عملها

انفجار الأشعة السينية المنبعثة من 1–Sco X

أستاذ المناطيد (مناطيد استكشاف الاشعة السينية)

استعادة التلسكوب الخاص باستكشاف الاشعة السينية من وسط الصحراء: جاك صائد حيوانات الكنغر

التحليق عاليا المناطيد.. وكواشف الأشعة السينية.. وعملية الإطلاق

مطاردة الأشعة السينية بالمناطيد.. البداية

ما هي الأشعة السينية؟

أشعة سينية من الفضاء الخارجي

إنجاز ماكسويل العظيم