In Eq. (9.4) we have resolved the velocity into components by telling how fast the object is moving in the x–direction, the y–direction, and the z–direction.

The velocity is completely specified, both as to magnitude and direction, if we give the numerical values of its three rectangular components:

On the other hand, the speed of the object is

Fig. 9–2. A change in velocity in which both the magnitude and direction change.

Next, suppose that, because of the action of a force, the velocity changes to some other direction and a different magnitude, as shown in Fig. 9–2. We can analyze this apparently complex situation rather simply if we evaluate the changes in the x–, y–, and z–components of velocity. The change in the component of the velocity in the x–direction in a time Δt is Δv_x=a_xΔt, where a_x is what we call the x–component of the acceleration. Similarly, we see that Δv_y=a_yΔt and Δv_z=a_zΔt. In these terms, we see that Newton’s Second Law, in saying that the force is in the same direction as the acceleration, is really three laws, in the sense that the component of the force in the x–, y–, or z–direction is equal to the mass times the rate of change of the corresponding component of velocity:

Just as the velocity and acceleration have been resolved into components by projecting a line segment representing the quantity, and its direction onto three coordinate axes, so, in the same way, a force in a given direction is represented by certain components in the x–, y–, and z–directions:

where F is the magnitude of the force and (x,F) represents the angle between the x–axis and the direction of F, etc.

Newton’s Second Law is given in complete form in Eq. (9.7). If we know the forces on an object and resolve them into x–, y–, and z–components, then we can find the motion of the object from these equations. Let us consider a simple example. Suppose there are no forces in the y– and z–directions, the only force being in the x–direction, say vertically. Equation (9.7) tells us that there would be changes in the velocity in the vertical direction, but no changes in the horizontal direction. This was demonstrated with a special apparatus in Chapter 7 (see Fig. 7–3). A falling body moves horizontally without any change in horizontal motion, while it moves vertically the same way as it would move if the horizontal motion were zero. In other words, motions in the x–, y–, and z–directions are independent if the forces are not connected.

مواضيع ذات صلة

أنظمة لأكثر من جسيم واحد

كمية التحرك الزاوية والقوة المركزية

الحركة الدورانية

امثلة عن الاتزان الاستاتيكي للأجسام الممتدة

الاتزان الاستاتيكي للأجسام الممتدة

تعريف العزم

تذبذبات صغيرة لبندول

اعتبارات الطاقة في الحركة التوافقية البسيطة

الحل الهندسي للمعادلة التفاضلية للحركة التوافقية البسيطة، دائرة المرجع

الحل باستخدام حساب التفاضل والتكامل

قانون هوك والمعادلة التفاضلية للحركة التوافقية البسيطة

القدرة ووحدات الشغل